home *** CD-ROM | disk | FTP | other *** search
- Path: comma.rhein.de!serpens!not-for-mail
- From: mlelstv@serpens.rhein.de (Michael van Elst)
- Newsgroups: comp.sys.amiga.hardware,comp.sys.amiga.misc
- Subject: Re: Help: Boot menu corrupt!
- Date: 4 Jan 1996 08:30:52 +0100
- Organization: dis-
- Message-ID: <4cfvnc$pdd@serpens.rhein.de>
- References: <zp547aaC2xkAZ1a@blank1.blanker.ruhr.de>
- NNTP-Posting-Host: serpens.rhein.de
-
- HAWK@blanker.ruhr.de (Peter Elzner) writes:
-
- >It could be a SCSI-problem because my system only works correct, if every
- >SCSI-device is terminated!!!
-
- No :)
-
- >I have tried to terminate only HD1 and the ZIP-drive but then I'm getting
- >random read/errors or SCSI-hangs on the devices.
-
- Check your cabling and the terminator power supply.
-
- >What I do not know is: Do I have to change the termination of the internal
- >SCSI-Controller? If so, how do I do this?
-
- It has to be removed (if it exists at all). The three terminator resistor
- packs are on the motherboard close to the controller chip (beneath
- the power supply). These are NOT soldered but have sockets.
-
- --
- Michael van Elst
-
- Internet: mlelstv@serpens.rhein.de
- "A potential Snark may lurk in every tree."
-